1. P. Nautiyal, C. Zhang, B. Boesl,  Arvind Agarwal, “Interfacial Deformation and Failure Mechanisms at the Single Splat Length Scale Revealed by Indentation of Cold Sprayed Aluminum Microparticles”, Materials Science and Engineering: A 824,  https://www.sciencedirect.com/science/article/pii/S0921509321010947, 2021

  2. T. Paul, P. Nautiyal, C. Zhang, B. Boesl,  Arvind Agarwal, “Role of In-situ Splat Sintering on Elastic and Damping Behavior of Cold Sprayed Aluminum Coatings”, Scripta Materialia., 204,  https://www.sciencedirect.com/science/article/pii/S135964622100405X?dgcid=author, 2021

  3. A. Loganathan, S. Rengifo, A. Franco Hernandez, C. Zhang, Arvind Agarwal, “Effect of nanodiamond reinforcement and heat-treatment on microstructure, mechanical and tribological properties of cold sprayed aluminum coating”, Surface and Coatings Tech., https://doi.org/10.1016/j.surfcoat.2021.127037, 2021.

  4. Nautiyal, C. Zhang, V. Champagne, B. Boesl and Arvind Agarwal, “In-situ Mechanical Investigation of the Deformation of Splat Interfaces in Cold-Sprayed Aluminum Alloy”, Mater. Sci. Eng. A.vol. 737, pp. 297-3092018.

  5. P. Nautiyal, C. Zhang, V. Champagne, B. Boesl and Arvind Agarwal, “In-situ Creep Deformation of Cold-sprayed Aluminum Splats at Elevated Temperatures”, Surf. Coat. Tech.,doi.org/10.1016/j.surfcoat.2019.05.045.vol. 372, pp. 353–360, 2019

  6. A. Loganathan, A. Sahoo, S. Rengifo- C. Rudolf, C. Zhang, T. Laha, B. Boesl, and Arvind Agarwal, “Multi-Scale Tribological and Nanomechanical Behavior of Cold Sprayed Ti2AlC MAX Phase Coating, Surf. Coat. Tech., vol. 334, pp.384-393, 2018.

  7. A. Loganathan, S. Rengifo, A. F. Hernandez, Y. Emirov, C. Zhang, B. Boesl, J. Karthikeyan and Arvind Agarwal, “Effect of 2D WS2 Addition on Cold Sprayed Aluminum Coating”, J. Thermal Spray Tech.DOI: 10.1007/s11666-017-0608-8, 2017.

  8. S. B. Pitchuka, R. Jha, M. Guzman, G. Sundararajan and Arvind Agarwal, “Indentation Creep Behavior of Cold sprayed Aluminum based Glassy Coating”, Mater. Sci. Eng. A, vol. 658, pp. 415-421, 2016.

  9. S. B. Pitchuka, D. Lahiri, G. Sundararajan, and Arvind Agarwal, “Scratch Induced Deformation Behavior of Cold Sprayed Aluminum Amorphous/Nanocrystalline Coatings at Multiple Load Scales”, J. Therm. Spray Tech., DOI: 10.1007/s11666-013-0021-x 2013.

  10. D. Lahiri, P. Gill, C. Zhang, V. Singh, S. Scudino, J. Karthikeyan, N. Munroe, S. Seal and Arvind Agarwal, “Cold Sprayed Aluminum Based Glassy Coatings: Synthesis, Wear and Corrosion Properties”, Surf. Coat. Tech., vol. 232, pp. 33–40, 2013.

  11. S. R. Bakshi, D. Wang, T. Price, D. Zhang, A. K. Keshri, Y. Chen, D. G. McCartney, P. Shipway and Arvind Agarwal, “Microstructure and Wear Properties of Aluminum/Aluminum-Silicon Composite Coatings Prepared by Cold Spraying”, Surf. Coat. Tech., vol. 204 (4), pp. 503-510, 2009.

  12. S. R. Bakshi, V. Singh, K. Balani, D. G. McCartney, S. Seal and Arvind Agarwal, “Carbon Nanotube Reinforced Aluminum Composite Coating via Cold Spraying”, Surf. Coat. Tech., vol. 202, pp. 5162-5169, 2008.

  13. S. R. Bakshi, T. Laha, K. Balani, Arvind Agarwal and J. Karthikeyan, “Effect of Carrier Gas On Mechanical Properties And Fracture Behaviour Of Cold Sprayed Aluminium Coatings”. Surface Engineering, vol. 23, No.1, (2007), pp. 18-22.

  14. K. Balani, Arvind Agarwal, J. Karthiekyan, and S. Seal: Transmission Electron Microscopy of Cold Sprayed 1100 Al Coating, Scripta Mater, vol. 53, 2005, pp. 845-850.